NEAR NEW OFFICE & WORKSHOP WITH TWO 10 TONNE GANTRY CRANES AND SUBSTANTIAL POWER
Office Ground: 196 sqm Office First: 160 sqm Mezzanine: 66 sqm Workshop: 803 sqm The improvements include an office and workshop facility with a total area of 1,225 sqm. The premises is fitted with two ten (10) tonne gantry cranes and substantial power for all types of fabrication uses. Improvements are constructed with concrete floors, tilt slab walls, concrete mezzanine office floor, and iron roof plus gantry cranes. Office - 356 sqm The facility consists of ground floor office, upper office floor and workshop facility. The building includes an office to front of the property and rear workshop. The office includes carpets, reverse cycle air-conditioning, painted walls, suspended ceiling with recessed lights, power points and computer and telephone connections on both levels. The office is above average for the Canning Vale area. Workshop - 803 sqm (plus mezzanine of 66 sqm) The workshop is constructed with concrete walls and concrete floors and iron roof. Internally the workshop is column free with reinforced column on the perimeter of the internal walls to allow for two ten (10) gantry cranes, 3 roller doors located in both elevations allowing access from sides of the building. Roller doors have a height of approximately 6.5 metre. The height of the warehouse is approximately 10 metres. We consider the facility to be well sort after. The development has landscaped gardens, two crossovers with a dual street frontage. Overall the premises are in good condition.